Quick
Search: 
 
advanced search
 GSW Home    GeoRef Home    My GSW Alerts    Contact GSW    About GSW    Journals List    Help 
  Environmental and Engineering Geoscience   Signup for GSW Email News
JOURNAL HOME HELP CONTACT PUBLISHER SUBSCRIBE ARCHIVE SEARCH TABLE OF CONTENTS

Environmental and Engineering Geoscience; February 1997; v. 3; no. 1; p. 31-43
This Article
Right arrow Submit a response
Right arrow Alert me when this article is cited
Right arrow Alert me when eLetters are posted
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow reprints & permissions
Right arrow Order Hardcopy of Full Text via AGI/GeoRef
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Hylland, M. D.
Right arrow Articles by Lowe, M.
Right arrow Search for Related Content
GeoRef
Right arrow GeoRef Citation

Regional landslide-hazard evaluation using landslide slopes, western Wasatch County, Utah

Michael D. Hylland, and Mike Lowe

Utah Geological Survey, Salt Lake City, UT, United States

Landsliding has historically been one of the most damaging geologic hazards in western Wasatch County, Utah. Accordingly, we mapped and analyzed landslides (slumps and debris slides) in the area to provide an empirical basis for regional landslide-hazard evaluation. The 336 landslides in the 250-sq-mi (650-km 2 ) area involve 20 geologic units, including Mississippian- to Quaternary-aged rock and unconsolidated deposits. Landsliding in western Wasatch County is characterized by a strong correlation between geologic material and landslide-slope inclination. From a simple statistical analysis of overall slope inclinations of late Holocene landslides, we determined "critical" slope inclinations above which late Holocene landsliding has typically occurred and used these as the primary basis for defining relative landslide hazard. The critical slopes vary for individual geologic units and range from 15 to 50 percent (9 degrees -27 degrees ). The critical slope values and landslide locations were used in conjunction with geologic and slope maps to construct qualitative landslide-susceptibility maps for use by county planners. The maps delineate areas of low, moderate, and high relative hazard and indicate where studies should be completed prior to development to evaluate site-specific slope-stability conditions. Critical slopes as determined in this study provide a consistent empirical reference that is useful for evaluating relative landslide hazard and guiding land-use-planning decisions in large, geologically complex areas.

This record provided courtesy of AGI/GeoRef.







JOURNAL HOME HELP CONTACT PUBLISHER SUBSCRIBE ARCHIVE SEARCH TABLE OF CONTENTS
Copyright © 2008 by Association of Engineering Geologists